water/meth setup ?'s.. for draw through setup - Aircooled Volkswagen Forum
Ultimate Aircooled Volkswagen Forum

Go Back   Aircooled Volkswagen Forum > Mechanical and Technical > Turbochargers

Turbochargers Turbochargers - Turbo Systems, Boost Pressure, Compressors

Reply
 
LinkBack Thread Tools Display Modes
April 16th, 2017, 07:51 AM   #1
Senior Member
 
Joined: Jan 2010

Posts: 121
Thanks: 1

water/meth setup ?'s.. for draw through setup

Hey Guys,
so its been a while since I've really done much to my turbo car, but after taking it out the other night and lining up with some built subaru's and Evo's i'd like to turn mine up a little more. I'm running 110 race fuel at 25lbs of boost. Have been wanting to add a water meth inj. setup for a couple years now but just never got around to it. I'll stay with the 110 but I'm thinking the intercooling effect will wake up some power, and I should be able to push the timing a little and wake some more power up that way. I'm thinking about the stage 2 Snow kit, as it looks like it has nice features for the cost. Any insight on setting a system like this up on a draw through setup? Better to inject it into the manifold before the turbo under the carb? Or possibly use 2 nozzles and plumb one per side into the intake before the end castings?

Thanks
Jason
vwjunkie53 is offline  
Sponsored Links
Advertisement
 
April 16th, 2017, 06:29 PM   #2
Senior Member
 
Fiatdude's Avatar
 
Joined: Sep 2008
From: 909

Posts: 5,696
Thanks: 30

After the turbo --- AJ has done a ton of playing with these and it you ask him he would probably help you out
Fiatdude is offline  
April 30th, 2017, 10:14 AM   #3
Junior Member
 
Joined: Aug 2016
From: San Diego CA

Posts: 9

I Drive: 2008 mazdaspeed 3 318whp
My Project: 1963 VW bug turboed 2110
after the turbo. and i have a stage 2 snow performance controller brand new that im not using i would sell for cheaper than new.
chriswillrise is offline  
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
New setup (water/meth & MSD) Turbo Draw through Rodv8 Turbochargers 1 July 21st, 2014 08:33 PM
Few parts for the new setup Jeff Newcomb Nitrous 14 January 25th, 2013 09:53 AM
2 step setup simplyvinyl Fuel Delivery 5 April 18th, 2012 02:29 PM
CB 1.4 setup slalombuggy Engines 7 July 21st, 2011 03:35 PM
Water , meth injection shag55 Drag Racing 7 January 25th, 2010 02:26 PM




Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.